Specialists in Acoustic, Access and Leisure Flooring SystemsVisit our online shop

The partial access floor has been developed for areas where cable management is necessary but where full computer room access flooring is unlikely to be required.  Many office environments have determined layouts early in the structure of the building and do not change dramatically during the course of its life.


It is our experience as suppliers and installers of raised flooring that in as much as 80% of the installations completed using full access floors, less than 10% of the total floor area is likely to require access during its working life.


It is commonly believed that providing a full access floor during the build will accommodate the use of any future business type.  In reality the use of the working area is likely to be determined by exits, toilets, kitchens and walkways within the layout of the office, which are unlikely to change dramatically.

Durabella Partial Access Commercial Flooring


TIMBER SYSTEMS:PC22

The partial access floor has been developed for areas where cable management is necessary but where full computer room access flooring is unlikely to be required.  Many office environments have determined layouts early in the structure of the building and do not change dramatically during the course of its life.


Durabella Full Access Commercial Flooring


It is our experience as suppliers and installers of raised flooring that in as much as 80% of the installations completed using full access floors, less than 10% of the total floor area is likely to require access during its working life.


It is commonly believed that providing a full access floor during the build will accommodate the use of any future business type.  In reality the use of the working area is likely to be determined by exits, toilets, kitchens and walkways within the layout of the office, which are unlikely to change. dramatically.

TIMBER SYSTEMS:PC30/PC38

softwood timber batten
packers
acoustic base
2mm packer
5mm packer
cradle plate

The panel consists of a high grade 30mm chipboard core with steel top sheet and bottom tray, all roll formed together creating a fully steel encapsulated panel to be loose laid with complete electrical continuity.  The resulting panel is dimensionally accurate with a rigid perimeter that is exceptionally resistant to damage.


All of our steel encapsulated panels are designed to be overload with finishes by others such as loose laid carpet tiles. Whatever your requirements Durabella will have the flooring solution to suit you.

DUR-BSEN3-E Panel




This panel consists of high grade 38mm bare chipboard and is designed to provide the benefits of a full access system at an economic price.  Also available in 30mm high grade.


Our office grade panel is designed to receive loose laid carpet tiles by others but can have a wide range of factory bonded finishes that include wood, ceramic tile and high pressure laminate and vinyl.  


Whatever your requirements Durabella will have the flooring solution to suit you.

DUR-OG38 Panel


The DUR-GX Pedestal head is a 90mm diameter disc of steel construction welded to and extended 1” domed socket.  


An anti-vibration cap can be supplied for use with or without stringers that have eight integral upstands to ensure that panels are aligned and retained in position while being instantly removable with the correct lifting device.


The head is threaded to a 1” BSP and fitted onto the upstand with a total vertical adjustment of 50mm in order to accommodate sub-floor tolerances.


The 1” threaded hollow tube is electro plated and assembled with a lightweight nut to off the locking facility.  


DUR-GX Pedestal

The base is a steel formed 100mm square with the upstand welded to it. Pre-formed holes are incorporated to facilitate mechanical fixing if required.

The DUR-P16 Support Pedestal head is an aluminium die-casting suitable for use with or without stringers. Eight integral upstands ensure that panels are aligned and retainined in position while being instantly removable with the correct lifting device.  


The head is a close fit over a M16 threaded stud that has a levelling nut to provide a total vertical adjustment of 50mm in order to accommodate sub-floor tolerances. The levelling nut allows fine adjustment of the head to the correct finished floor height and can then be fixed with adhesive.


The M16 threaded steel bar is electro plated and cut to a suitable length. A PVC sleeve is available for cable protection.

DUR-P16 Support Pedestal

The base is an aluminium die-casting, 114mm in diameter, with webs to reinforce the central boss housing the steel column.


Pre-cast holes are incorporated to facilitate mechanical fixings if required.  Earthing studs may also be pre-fitted.




Product Range Raised Flooring - Full/Partial Access Systems




threaded hollow steel tube


steel square base



threaded steel column


die-cast aluminium base